Ford 2015 Transit v.1 Manuel d'utilisateur télécharger pdf (Page 150)

PRINCIPLE OF OPERATION

WARNING

The system does not relieve you of

your responsibility to drive with due

care and attention.

Cruise control allows you to control your

speed using the switches on the steering

wheel. You can use cruise control when

you exceed approximately 20 mph (30

km/h).

USING CRUISE CONTROL

WARNINGS

Do not use cruise control in heavy

traffic, on winding roads or when the

road surface is slippery. This could

result in loss of vehicle control, serious

injury or death.

When you are going downhill, your

vehicle speed may increase above

the set speed. The system will not

apply the brakes. Change down a gear to

assist the system in maintaining the set

speed. Failure to do so could result in loss

of vehicle control, serious injury or death.

Note: Cruise control will disengage if your

vehicle speed decreases more than 10 mph

(16 km/h) below your set speed while

driving uphill.

E142437

The cruise controls are located on the

steering wheel.

Switching Cruise Control On

Press and release ON.

E71340

The indicator will display in the

instrument cluster.

Setting a Speed

1. Accelerate to the desired speed.

2. Press and release SET+.

3. Take your foot off the accelerator

pedal.

Changing the Set Speed

• Press and hold SET+ or SET-. Release

the control when you reach the desired

speed.

• Press and release SET+ or SET-. The

set speed will change in approximately

1 mph (2 km/h) increments.

• Press the accelerator or brake pedal

until you reach the desired speed. Press

and release SET+.

Canceling the Set Speed

Pull CAN toward you and release, or tap

the brake pedal. The set speed will not be

erased.

147

Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014

Cruise Control

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 460 461

Commentaires sur ces manuels

Pas de commentaire