Ford 2015 Taurus Manuel d'utilisateur télécharger pdf (Page 288)

100

101

Only use oils certified for gasoline engines by the

American Petroleum Institute (API). An oil with this

trademark symbol conforms to the current engine and

emission system protection standards and fuel

economy requirements of the International Lubricants

Specification Advisory Council (ILSAC), comprised of

U.S. and Japanese automobile manufacturers.

1. Remove the filler cap.

2. Add engine oil that meets Ford specifications. See Capacities and

Specifications for more information.

3. Replace the filler cap. Turn it until you feel a strong resistance.

ENGINE COOLANT CHECK

Checking the Engine Coolant

The concentration and level of engine coolant should be checked at the

intervals listed in Scheduled Maintenance Information.

Note: Make sure that the level is at the FULL COLD level or within the

COLD FILL RANGE in the coolant reservoir.

Note: Coolant expands when it is hot. The level may extend beyond the

COLD FILL RANGE.

If the level is below the COLD FILL RANGE, add coolant immediately.

See Adding Engine Coolant in this chapter.

The coolant concentration should be maintained within 48% to 50%,

which equates to a freeze point between -30°F (-34°C) and -34°F

(-37°C).

Note: For best results, coolant concentration should be tested with a

refractometer such as Robinair Coolant and Battery Refractometer

75240. We do not recommend the use of hydrometers or coolant test

strips for measuring coolant concentrations.

Note: Automotive fluids are not interchangeable; do not use engine

coolant/antifreeze or windshield washer fluid outside of its specified

function and vehicle location.

Maintenance 287

2015 Taurus

Owners Guide gf, 1st Printing, April 2014

USA (fus)

1 2 ... 283 284 285 286 287 288 289 290 291 292 293 ... 557 558

Commentaires sur ces manuels

Pas de commentaire

Ford 2015 Taurus Manuel d'utilisateur Page 288

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2015 Taurus