Ford 2015 Focus Electric Manuel d'utilisateur télécharger pdf (Page 57)

USING MYKEY WITH REMOTE

START SYSTEMS

Vehicles With Ford-Approved

Aftermarket Remote Start

Systems

When using a Ford-approved aftermarket

remote start system, the vehicle recognizes

the remote start system transmitter as an

additional admin key. It is the vehicle’s

default setting.

When you start your vehicle with a

Ford-approved aftermarket remote start

system transmitter, the system shuts the

vehicle off after you open the door or shift

your vehicle into gear. This is intentional.

When you restart your vehicle, it reads the

intelligent access key status instead of the

remote start system transmitter status.

With a Ford-approved aftermarket remote

start system, it is possible to program all

intelligent access keys as MyKeys

unintentionally. If this happens, then the

remote start system transmitter is the

admin key. If you want to have only one

intelligent access key as a MyKey, or do not

want to have any MyKeys, then you need

to use your remote start system

transmitter to clear all MyKeys. In that

case, follow these steps:

1. Enter your vehicle and close all doors.

2. Start your vehicle using your remote

start system transmitter.

3. See Clearing All MyKeys (page 52).

Follow Steps 1-3.

After clearing your MyKeys, you can create

a new MyKey. See Creating a MyKey

(page 51).

Note: With push-button start, you cannot

program the remote start system

transmitter as a MyKey. Always treat the

remote start system transmitter as you

would any other admin key.

Vehicles With Non-Ford-Approved

Aftermarket Remote Start

Systems

MyKey is not compatible with

non-Ford-approved aftermarket remote

start systems. If you choose to install a

remote start system, see an authorized

dealer for a Ford-approved remote start

system.

The following information may help if you

choose to install a non-Ford-approved

remote start system. The actions provided

below do not make MyKey compatible with

non-Ford-approved remote start systems,

but may help you retain some MyKey

functions.

When using a non-Ford-approved remote

start system, the vehicle may recognize

the remote start system as an additional

admin key with its associated privileges. If

you restart the vehicle bypowering it off

and waiting a few seconds, and then

powering the vehicle back on, you may

retain some MyKey functions. This action

forces your vehicle to read the intelligent

access key instead of the remote start

system transmitter and then uses the

MyKey associated privileges.

Note: The MyKey system status menu

display may include the remote start system

as an additional key in the total count of

programmed keys. See Checking MyKey

System Status (page 53).

With a non-Ford-approved aftermarket

remote start system, it is possible to

program all intelligent access keys as

MyKeys unintentionally. If this happens,

then the remote start system transmitter

is the admin key. If you want to have only

one intelligent access key as a MyKey, or

do not want to have any MyKeys, then you

need to use your remote start system

transmitter to clear all MyKeys. In that

case, follow these steps:

1. Enter your vehicle and close all doors.

54

Focus (CDH), enUSA, First Printing

MyKey™

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 368 369

Commentaires sur ces manuels

Pas de commentaire