Ford 2014 F-550 v.2 Manuel d'utilisateur télécharger pdf (Page 37)

Then...If...

The Belt-Minder feature will not activate.The driver's safety belt is buckled before

the ignition switch is turned to the on posi-

tion or less than 1-2 minutes have elapsed

since the ignition switch has been turned

to on...

The Belt-Minder feature is activated - the

safety belt warning light illuminates and

the warning chime sounds for six seconds

every 25 seconds, repeating for about five

minutes or until the safety belts are

buckled.

The driver's safety belt is not buckled when

the vehicle has reached at least 6 mph (9.7

km/h) and 1-2 minutes have elapsed since

the ignition switch has been turned to on...

The Belt-Minder feature is activated - the

safety belt warning light illuminates and

the warning chime sounds for six seconds

every 25 seconds, repeating for about five

minutes or until the safety belts are

buckled.

The driver's safety belt becomes unbuckled

for about one minute while the vehicle is

traveling at least 6 mph (9.7 km/h) and

more than 1-2 minutes have elapsed since

the ignition switch has been turned to on...

Deactivating and Activating the

Belt-Minder Feature (Driver Only)

WARNING

While the system allows you to

deactivate it, this system is designed

to improve your chances of being

safely belted and surviving an accident.

We recommend you leave the system

activated for yourself and others who may

use the vehicle. To reduce the risk of injury,

do not deactivate or activate the system

while driving the vehicle.

Note: If you are using MyKey, you cannot

disable the Belt-Minder. Also, if the

Belt-Minder has been previously disabled,

it will be re-enabled during the use of

MyKey. See MyKey™ (page 50).

Read Steps 1 - 4 thoroughly before

proceeding with the programming

procedure.

Deactivate or activate the system by

performing the following procedure:

Before following the procedure, make sure

that:

• The parking brake is set.

• The transmission is in park (P).

• The ignition is off.

• All vehicle doors are closed.

• The driver's safety belt is unbuckled.

1. Turn the ignition on. Do not start the

engine.

2. Wait until the safety belt warning light

turns off (about one minute). Step 3

must be completed within 30 seconds

after the safety belt warning light turns

off.

3. Buckle then unbuckle the safety belt

three times at a moderate speed,

ending with the safety belt in the

unbuckled state. After Step 3, the

safety belt warning light will turn on.

34

Super Duty (TFA)

Safety Belts

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 459 460

Commentaires sur ces manuels

Pas de commentaire