Ford 2014 F-550 v.2 Manuel d'utilisateur télécharger pdf (Page 246)

1. Make sure the headlamps are off.

2. Remove the screws and lamp

assembly from the vehicle as wiring

permits.

3. Remove the bulb socket by rotating it

counterclockwise.

4. Pull the bulb straight out of the socket.

5. Install the new bulb in reverse order.

Replacing the License Plate Lamp

Bulb

Note: The license plate bulbs are located

behind the rear bumper.

E163830

1. Reach behind the rear bumper to

locate the bulb.

2. Twist the bulb socket counterclockwise

and carefully pull to remove it from the

lamp assembly.

3. Pull out the old bulb from the socket

and push in the new bulb.

4. Install the new bulb in reverse order.

BULB SPECIFICATION CHART

Replacement bulbs are specified in the

chart below. Headlamp bulbs must be

marked with an authorized “D.O.T.” for

North America and an “E” for Europe to

ensure lamp performance, light brightness

and pattern and safe visibility. The correct

bulbs will not damage the lamp assembly

or void the lamp assembly warranty and

will provide quality bulb illumination time.

Trade nameNumber of BulbsFunction

H13/90082*Headlamps

W5W2*Side marker lamp - front

3157NA2*Park/Turn lamp- front

31572Tail/stop/turn/side marker

(pickups only)

31572Tail/stop/turn/side marker

(chassis cabs only)

9212Reverse (pickups only)

31572Reverse (chassis cabs only)

194—License plate lamp

9145—Fog lamp

243

Super Duty (TFA)

Maintenance

1 2 ... 241 242 243 244 245 246 247 248 249 250 251 ... 459 460

Commentaires sur ces manuels

Pas de commentaire