Ford 2014 Explorer v.3 Manuel d'utilisateur Page 248

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 593
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 247
Graphic display
(bars between
vehicles)
Following
distance
Following
distance at
60 mph
(100 km/h)
Dynamic
behavior
1 bar 1 second 31 yards (28 m) Sporty
2 bars 1.4 seconds 43 yards (39 m) Normal
3 bars 1.8 seconds 55 yards (50 m) Normal
4 bars 2.2 seconds 67 yards (61 m) Comfort
Each time you restart your vehicle, the system will select the last chosen
gap for the current driver.
Disengaging Adaptive Cruise Control
Press the brake pedal or press CNCL to disengage the system. The last
set speed will display with a strikethrough.
Disengaging the system will not erase your previous set speed.
Overriding Adaptive Cruise Control
WARNING: Whenever the driver is overriding the ACC by
pressing the accelerator pedal, the ACC will not automatically
apply the brakes to maintain separation from any vehicle ahead.
You can override the set speed and gap distance by pressing the
accelerator pedal.
When you are overriding the system, the green indicator light
illuminates and the follow vehicle does not show in the
information display. The system will resume operation when
you release the accelerator pedal. The vehicle speed will decrease to
the set speed, or a lower speed if following a slower vehicle.
Changing the Set Speed
There are three ways to change the set speed:
Accelerate or brake to the desired speed and press SET upward and
release.
Increase or decrease the speed by holding SET upward or downward
until the desired set speed is shown on the information display.
The vehicle speed will gradually change to the selected speed.
Increase or decrease the speed in increments of 1 mph (2 km/h) by
briefly pressing SET upward or downward.
Cruise Control 247
2014 Explorer (exp)
Owners Guide gf, 3rd Printing, September 2013
USA (fus)
Vue de la page 247
1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 592 593

Commentaires sur ces manuels

Pas de commentaire