Ford 2014 Explorer v.3 Manuel d'utilisateur télécharger pdf (Page 339)

100

101

3. Carefully separate the cover from the housing.

4. Remove the air filter element from the housing.

5. Wipe the cover and the housing clean to remove any dirt or debris and

to make sure the cover seals to the housing.

6. Install a new air filter element. Be careful not to crimp the filter

element edges between the housing and the cover. This could cause filter

damage and allow unfiltered air to enter the engine if not properly

seated.

7. Lower the driver’s side of the cover and slide the

three tabs on the cover into the three slots in the

housing.

8. Lower the passenger’s side of the cover. Engage

the two clamps to secure the cover to the housing.

ADJUSTING THE HEADLAMPS

The headlamps on your vehicle are properly aimed at the assembly plant.

If your vehicle has been in an accident, an authorized dealer should

check the alignment of your headlamps.

Vertical Aim Adjustment

The headlamps on your vehicle can only be vertically adjusted. Your

vehicle does not require horizontal aim adjustments.

To adjust the headlamps:

1. Park your vehicle on a level surface about 25 feet (7.6 meters) away

from a vertical plain surface (3). Check your headlamp alignment at

night or in a dark area so that you can see the headlamp beam pattern.

338 Maintenance

2014 Explorer (exp)

Owners Guide gf, 3rd Printing, September 2013

USA (fus)

1 2 ... 334 335 336 337 338 339 340 341 342 343 344 ... 592 593

Commentaires sur ces manuels

Pas de commentaire

Ford 2014 Explorer v.3 Manuel d'utilisateur Page 339

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2014 Explorer v.3