Ford 2013 Taurus v.1 Manuel d'utilisateur télécharger pdf (Page 169)

100

101

1. Switch the ignition on.

2. Hold the garage door hand-held

transmitter 1–3 in. (2–8 cm) away

from the button you want to program.

Note: During programming, the

hand-held transmitter may stop

transmitting. If this occurs press and

hold the function button while you

press and release the hand-held transmitter every two seconds. The

indicator light will flash slowly and then rapidly once the radio frequency

signal is accepted.

3. Press and hold both buttons until the indicator light changes from

flashing slowly to rapidly, then release.

4. Press and hold the function button you programmed for 5 seconds,

then release. You may need to do this twice to activate the door. If your

garage door does not operate, observe the indicator light.

If the indicator light stays on, programming is complete. Press and

release the programmed button to activate the door.

If the indicator light flashes rapidly for two seconds than turns to a

constant light, follow the steps below.

Note: You may need a ladder to

reach the unit and you may need to

remove the cover or lamp lens.

1. Press the learn button on the

garage door opener motor.

Note: You will have 30 seconds to

complete the next step.

2. Return to your car.

3. Press and hold the function

button for 2 seconds, then release.

Repeat this step. Depending on the

brand of garage door opener you

may do repeat this sequence a third

time.

To program additional buttons repeat steps one through four.

For questions or comments, please contact HomeLink威 at

www.homelink.com or 1-800-355-3515.

Universal Garage Door Opener 169

2013 Taurus

Owners Guide gf, 1st Printing

USA (fus)

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 540 541

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Taurus v.1 Manuel d'utilisateur Page 169

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Taurus v.1