Ford 2013 Fusion Hybrid v.1 Manuel d'utilisateur télécharger pdf (Page 199)

Each time the vehicle is restarted, the last

chosen gap for the current driver will be

automatically selected.

Disengaging the System

Press the brake pedal or press CNCL. The

last set speed will be displayed with a

strikethrough but will not be erased.

Overriding the System

WARNING

Whenever the driver is overriding the

system by pressing the accelerator

pedal, the system will not

automatically apply the brakes to maintain

separation from any vehicle ahead.

The set speed and gap distance can be

overridden by pressing the accelerator

pedal.

E144529

When you override the system,

the green indicator light is

illuminated, and the follow

vehicle is not shown in the

information display.

The system will resume operation when

you release the accelerator pedal. The

vehicle speed will decrease to the set

speed, or a lower speed if following a

slower vehicle.

Changing the Set Speed

• Accelerate or brake to the desired

speed, then press and release SET+.

• Press and hold SET+ or SET- until the

desired set speed is shown on the

information display. The vehicle speed

will gradually change to the selected

speed.

• Press and release SET+ or SET-. The

set speed will change in approximately

1 mph (2 km/h) increments.

The system may apply the brakes to slow

the vehicle to the new set speed. The set

speed will display continuously in the

information display while the system is

active.

Resuming the Set Speed

Note: Resume should only be used if you

are aware of the set speed and intend to

return to it.

Press and release RES. The vehicle will

return to the previously set speed. The set

speed will display continuously in the

information display while the system is

active.

Low Speed Automatic

Cancellation

The system is not functional at vehicle

speeds below 12 mph (20 km/h). An

audible alarm will sound and the

automatic braking will be released if the

vehicle drops below this speed.

Hilly Condition Usage

Note: An audible alarm will sound and the

system will shut down if it is applying brakes

for an extended period of time. This allows

the brakes to cool down. The system will

function normally again when the brakes

have cooled down.

You should select a lower gear position

when the system is active in situations

such as prolonged downhill driving on

steep grades (i.e., driving in mountainous

areas). Additional engine braking is needed

in these situations to reduce the load on

the vehicle’s regular brake system to

prevent them from overheating.

Switching the System Off

Note: The set speed memory is erased

when you switch off the system.

197

Cruise Control

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 460 461

Commentaires sur ces manuels

Pas de commentaire