Ford 2013 Fusion Hybrid v.1 Manuel d'utilisateur télécharger pdf (Page 178)

E155983

3. Insert the screwdriver (or similar tool)

into the access hole and press the lever

foreword while pulling the gearshift

lever out of the P (Park) position and

into the N (Neutral) position.

4. Remove the tool and reinstall the

panel.

5. Start the vehicle and release the

parking brake.

If Your Vehicle Gets Stuck In Mud

or Snow

Note: Do not rock the vehicle if the engine

is not at normal operating temperature or

damage to the transmission may occur.

Note: Do not rock the vehicle for more than

a minute or damage to the transmission and

tires may occur, or the engine may overheat.

If your vehicle gets stuck in mud or snow,

it may be rocked out by shifting between

forward and reverse gears, stopping

between shifts in a steady pattern. Press

lightly on the accelerator in each gear.

HILL START ASSIST (IF EQUIPPED)

WARNINGS

The system does not replace the

parking brake. When you leave your

vehicle, always apply the parking

brake and move the transmission selector

lever into position P (Park).

WARNINGS

You must remain in your vehicle once

you have activated the system.

During all times, you are responsible

for controlling your vehicle,

supervising the system and

intervening, if required.

If the engine is revved excessively, or

if a malfunction is detected, the

system will be deactivated.

The system makes it easier to pull away

when your vehicle is on a slope without the

need to use the parking brake.

When the system is active, your vehicle will

remain stationary on the slope for two to

three seconds after you release the brake

pedal. This allows you time to move your

foot from the brake to the accelerator

pedal. The brakes are released

automatically once the engine has

developed sufficient drive to prevent your

vehicle from rolling down the slope. This

is an advantage when pulling away on a

slope, (for example from a car park ramp,

traffic lights or when reversing uphill into

a parking space).

The system will activate automatically on

any slope which can result in significant

vehicle rollback.

Using Hill Start Assist

1. Press the brake pedal to bring your

vehicle to a complete standstill. Keep

the brake pedal pressed.

2. If the sensors detect that your vehicle

is on a slope, the system will be

activated automatically.

176

Transmission

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 460 461

Commentaires sur ces manuels

Pas de commentaire