Ford 2013 Fusion Hybrid v.1 Manuel d'utilisateur télécharger pdf (Page 171)

E144782

The high-voltage service disconnect is

located behind the rear fold down seats.

Disabling the High-Voltage Battery

1. Fold down the rear seats.

2. Locate the access door and remove

the plastic cover.

3. A cut out area will be visible which

allows your hand access to the service

disconnect.

E147234

4. Slide the handle on the service

disconnect outboard to the right. Energi

vehicles slide the handle outboard to

the left.

E146133

5. Pull the handle toward you and remove

the service disconnect from the vehicle

to disable the high-voltage battery.

Reverse this procedure the re-install the

service disconnect.

Reactivating the High-Voltage Battery

Note: If you have manually disconnected

the high-voltage service disconnect you will

need to reconnect the service disconnect

before it can be reactivated. The vehicle will

detect if the electrical system is safe and

reactivate automatically.

HIGH VOLTAGE BATTERY CUT-

OFF SWITCH

The high-voltage shut off operation shuts

off power from the high-voltage battery

after a collision, or if your vehicle receives

a substantial physical jolt.

To reactivate the vehicle after either event

perform the following steps:

1. Turn the ignition off.

2. Turn the ignition on.

3. If the vehicle is not powered after this

sequence, repeat steps 1 and 2.

For vehicles equipped with a push button

start system:

1. Press the START/STOP button to

turn ignition off.

169

High Voltage Battery

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 460 461

Commentaires sur ces manuels

Pas de commentaire