Ford 2013 Expedition v.2 Manuel d'utilisateur télécharger pdf (Page 277)

100

101

Connecting the Jumper Cables

WARNING: Do not connect the end of the second cable to the

negative (-) terminal of the battery to be jumped. A spark may

cause an explosion of the gases that surround the battery.

Note: Do not attach the negative (-) cable to fuel lines, engine rocker

covers, the intake manifold or electrical components as grounding points.

Note: In the illustration, the vehicle on the bottom is used to designate

the assisting (boosting) battery.

1. Connect the positive (+) jumper

cable to the positive (+) terminal of

the discharged battery.

2. Connect the other end of the

positive (+) cable to the positive

(+) terminal of the assisting battery.

3. Connect the negative (-) cable to

the negative (-) terminal of the

assisting battery.

4. Make the final connection of the

negative (-) cable to an exposed

metal part of the stalled vehicle’s

engine, away from the battery and

the carburetor or fuel injection

system.

Ensure that the cables are clear of fan blades, belts, moving parts of both

engines, or any fuel delivery system parts.

Jump Starting

1. Start the engine of the booster vehicle and run the engine at a

moderately increased speed.

2. Start the engine of the disabled vehicle.

3. Once the disabled vehicle has been started, run both engines for an

additional three minutes before disconnecting the jumper cables.

276 Roadside Emergencies

2013 Expedition (exd)

Owners Guide gf, 2nd Printing, October 2012

USA (fus)

1 2 ... 272 273 274 275 276 277 278 279 280 281 282 ... 507 508

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Expedition v.2 Manuel d'utilisateur Page 277

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Expedition v.2