Ford 2013 Expedition v.2 Manuel d'utilisateur télécharger pdf (Page 334)

100

101

• Standard load: A class of P-metric or Metric tires designed to carry a

maximum load at 35 psi [37 psi (2.5 bar) for Metric tires]. Increasing

the inflation pressure beyond this pressure will not increase the tire’s

load-carrying capability.

• Extra load: A class of P-metric or Metric tires designed to carry a

heavier maximum load at 41 psi [43 psi (2.9 bar) for Metric tires].

Increasing the inflation pressure beyond this pressure will not increase

the tire’s load-carrying capability.

• kPa: Kilopascal, a metric unit of air pressure.

• PSI: Pounds per square inch, a standard unit of air pressure.

• Cold tire pressure: The tire pressure when the vehicle has been

stationary and out of direct sunlight for an hour or more and prior to

the vehicle being driven for 1 mile (1.6 kilometers).

• Recommended inflation pressure: The cold inflation pressure found

on the Safety Compliance Certification Label (affixed to either the

door hinge pillar, door-latch post, or the door edge that meets the

door-latch post, next to the driver’s seating position) or Tire Label

located on the B-Pillar or the edge of the driver’s door.

• B-pillar: The structural member at the side of the vehicle behind the

front door.

• Bead area of the tire: Area of the tire next to the rim.

• Sidewall of the tire: Area between the bead area and the tread.

• Tread area of the tire: Area of the perimeter of the tire that

contacts the road when mounted on the vehicle.

• Rim: The metal support (wheel) for a tire or a tire and tube assembly

upon which the tire beads are seated.

Wheels and Tires 333

2013 Expedition (exd)

Owners Guide gf, 2nd Printing, October 2012

USA (fus)

1 2 ... 329 330 331 332 333 334 335 336 337 338 339 ... 507 508

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Expedition v.2 Manuel d'utilisateur Page 334

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Expedition v.2