Ford 2013 E-450 v.2 Manuel d'utilisateur télécharger pdf (Page 226)

100

101

CHECKING THE WIPER BLADES

Run the tip of your fingers over the edge of the blade

to check for roughness.

Clean the wiper blades with washer fluid or water

applied with a soft sponge or cloth.

CHANGING THE WIPER BLADES

Replace wiper blades at least once per year for optimum performance.

To replace the wiper blades:

1. Fold back the wiper arm and

position the wiper blade at a right

angle to the wiper arm.

2. To remove the wiper blade, press

the retaining clip (A) to disengage

the wiper blade, then pull the blade

down toward the windshield to

remove it from the arm.

3. Install the new wiper blade on

the arm and press it into place until a click is heard.

Poor wiper quality can be improved by cleaning the wiper blades and

windshield. Refer to Windows and wiper blades in the Cleaning

chapter.

To prolong the life of the wiper blades, it is highly recommended to

scrape off the ice on the windshield before turning on the wipers. The

layer of ice has many sharp edges and can damage the micro edge of the

wiper rubber element.

AIR FILTER CHECK

WARNING: To reduce the risk of vehicle damage and or

personal burn injuries, do not start your engine with the air

cleaner removed and do not remove it while the engine is running.

Note: Failure to use the correct air filter element may result in severe

engine damage. The customer warranty may be void for any damage to

the engine if the correct air filter element is not used.

Maintenance 225

2013 Econoline (eco)

Owners Guide gf, 2nd Printing, November 2012

USA (fus)

1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 436 437

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 E-450 v.2 Manuel d'utilisateur Page 226

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 E-450 v.2