Ford 2009 Explorer v.3 Manuel d'utilisateur télécharger pdf (Page 387)

100

101

3. Add only enough fluid through

the filler opening so that the fluid

level is at the bottom of the

opening.

Use only fluid that meets Ford specifications. Refer to the Maintenance

product specifications and capacities section in this chapter.

DRIVELINE UNIVERSAL JOINT, DRIVESHAFT AND SLIP YOKE

WARNING: Turn off the power running boards, if equipped,

before working under the vehicle, jacking or placing any object

under the vehicle. Never place your hand between the extended

running board and the vehicle. A moving running board may cause

injury.

If the original universal joints are replaced with universal joints equipped

with grease fittings, lubrication will be necessary.

Note: Your vehicle’s driveshaft is balanced. If undercoating the vehicle,

protect the driveshaft and universal joints to prevent overspray of any

undercoating material. If your vehicle has four-wheel drive, your vehicle

has two driveshafts, one connected to the rear axle and one connected

to the front axle.

AIR FILTER

Refer to scheduled maintenance information for the appropriate

intervals for changing the air filter element.

When changing the air filter element, use only the air filter element

listed. Refer to Motorcraft part numbers in this chapter.

WARNING: To reduce the risk of vehicle damage and/or

personal burn injuries do not start your engine with the air

cleaner removed and do not remove it while the engine is running.

Maintenance and Specifications

387

REVIEW COPY ——

2009 Explorer (exp), Owners Guide (own2002), 3rd Printing, Market: USA

(fus)

1 2 ... 382 383 384 385 386 387 388 389 390 391 392 ... 404 405

Commentaires sur ces manuels

Pas de commentaire

Ford 2009 Explorer v.3 Manuel d'utilisateur Page 387

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2009 Explorer v.3