Ford 1998 Taurus Manuel d'utilisateur télécharger pdf (Page 144)

High fluid level

Fluid levels above the

safe range may result

in transaxle failure. An

overfill condition of transmission fluid may cause

shift and/or engagement concerns and/or possible

damage.

High fluid levels can be caused by an overheating

condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type

is used. The type of fluid used is normally indicated

on the dipstick and/or dipstick handle and also in

the Lubricant specifications section in the

Capacities and specifications chapter.

Use of a non-approved automatic transmission

fluid may cause internal transmission

component damage.

If necessary, add fluid in 250 mL (1/2 pint)

increments through the filler tube until the level is

correct.

If an overfill occurs,

excess fluid should be

removed by a qualified

technician.

An overfill condition of transmission fluid may

cause shift and/or engagement concerns and/or

possible damage.

BATTERY

Your vehicle is

equipped with a

Motorcraft

maintenance-free

battery which normally

does not require

additional water during

its life of service.

DON’T ADD IF IN CROSSHATCH AREA--CHECH WHEN HOT-IDLING

Maintenance and care

144

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 191 192

Pas de commentaire

Ford 1998 Taurus Manuel d'utilisateur Page 144