Ford 1998 Explorer Manuel d'utilisateur télécharger pdf (Page 110)

To return to (Overdrive) mode, press the transmission control switch.

The TCIL will no longer be illuminated.

Each time the vehicle is started, the transmission will automatically

return to normal overdrive mode.

Every time the vehicle is shut off and restarted, you must press the

transmission control switch to cancel overdrive operation if driving in

overdrive is not desired.

2 (Second)

Use 2 (Second) to start-up on

slippery roads or to provide

additional engine braking on

downgrades.

1 (First)

Use 1 (Low) to provide maximum

engine braking on steep

downgrades. Upshifts can be made

by shifting to 2 (Second) or to

(Overdrive). Selecting 1 (Low)

at higher speeds causes the

transmission to shift to a lower gear,

and will shift to 1 (Low) after vehicle decelerates to the proper speed.

Driving with a 5–speed automatic transmission (4.0L engines only)

Understanding gearshift positions

Hold the brake pedal down while you move the gearshift lever

from position to position. If you do not hold the brake pedal

down, your vehicle may move unexpectedly and injure someone.

Pull the gearshift lever towards you and downward to move the

automatic gearshift.

Driving

110

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 209 210

Pas de commentaire

Ford 1998 Explorer Manuel d'utilisateur Page 110