Ford 2015 Focus Manuel d'utilisateur télécharger pdf (Page 75)

1. Insert the first previously programmed

coded key into the ignition.

2. Switch the ignition from off to on. Keep

the ignition on for at least 3 seconds,

but no more than 10 seconds.

3. Switch the ignition off and remove the

first coded key from the ignition.

4. After at least 3 seconds but within 10

seconds of switching the ignition off,

insert the second previously coded key

into the ignition.

5. Switch the ignition from off to on. Keep

the ignition on for at least 3 seconds,

but no more than 10 seconds.

6. Switch the ignition off and remove the

second previously programmed coded

key from the ignition.

7. After at least 3 seconds but within 10

seconds of switching the ignition off

and removing the previously

programmed coded key, insert the new

unprogrammed key into the ignition.

8. Switch the ignition from off to on. Keep

the ignition on for at least six seconds.

9. Remove the newly programmed coded

key from the ignition.

If you have successfully programmed the

coded key, it will start your vehicle and

operate the remote entry system.

If programming was unsuccessful, wait 10

seconds and repeat Steps 1 through 8. If

programming remains unsuccessful, have

your vehicle checked by an authorized

dealer.

Wait 20 seconds and repeat Steps 1

through 9 to program an additional key.

Programming a Spare Intelligent

Access Key

You must have two previously

programmed coded keys and the new

unprogrammed key readily accessible.

Contact an authorized dealer to have the

spare key programmed if two previously

programmed keys are not available.

Make sure that the ignition is switched off

before beginning this procedure. Make sure

that you close all the doors before

beginning and that they remain closed

throughout the procedure. Carry out all

steps within 30 seconds of starting the

sequence. Stop and wait for at least one

minute before starting again if you carry

out any steps out of sequence.

Note: You can program a maximum of eight

intelligent access keys to your vehicle.

Read and understand the entire procedure

before you begin.

E184385

2

1

1. Open the floor console storage

compartment lid.

2. Remove the tray.

72

Focus (CDH), enUSA, First Printing

Security

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 452 453

Commentaires sur ces manuels

Pas de commentaire