Ford 2015 F-150 Manuel d'utilisateur télécharger pdf (Page 89)

Note: Typical road dust, dirt and water

spots do not affect the performance of the

automatic high beam control. However, in

cold or inclement weather conditions, you

may notice a decrease in the availability of

the automatic high beam control, especially

at start up. If you want to change the beam

state independently of the system, you may

switch the high beams on or off using the

lighting control switch. Automatic high

beam control resumes when conditions are

correct.

Note: Using much larger tires or equipping

vehicle accessories such as snowplows can

modify your vehicle's ride height and

degrade automatic high beam control

performance.

A camera sensor, centrally mounted

behind the windshield of your vehicle,

continuously monitors conditions to decide

when to switch the high beams off and on.

Once the system is active, the high beams

switch on if:

• The outside light level is low enough.

• There is no traffic in front of your

vehicle.

• The vehicle speed is greater than

32 mph (52 km/h).

The high beams switch off if:

• The system detects the headlamps of

an approaching vehicle or the rear

lamps vehicle in front of you.

• Vehicle speed falls below 27 mph

(44 km/h).

• The outside light level is high enough

that high beams are not required.

• The system detects severe rain, snow

or fog.

• The camera is blocked.

Activating the System

Switch on automatic high beam control

using the information display and

autolamps. See Information Displays

(page 105).

E142451

Switch the lighting control to the

autolamps position.

Manually Overriding the System

When automatic high beam control has

activated the high beams, pushing or

pulling the stalk provides a temporary

override to low beam.

Use the information display menu to

permanently deactivate the system, or

switch the lighting control from autolamps

to headlamps.

FRONT FOG LAMPS (If Equipped)

E142453

86

F-150 (), enUSA, First Printing

Lighting

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 548 549

Commentaires sur ces manuels

Pas de commentaire