Ford 2014 Expedition v.1 Manuel d'utilisateur télécharger pdf (Page 157)

100

101

Rolling Code Programming

Note: If you do not follow the time-sensitive instructions, the device will

time out and you will have to repeat the complete procedure.

Note: It may be helpful to have another person assist you in

programming the transmitter.

1. Switch the ignition on.

2. Press and hold the outer two

buttons for 1–2 seconds, then

release.

Note: You may need a ladder to

reach the unit and you may need to

remove the cover or lamp lens.

Note: If you cannot locate the learn

button, see the Owner’s Manual for

your garage door opener or call the

toll-free help line at 1-866-572-2728.

3. Press the learn button on the

garage door opener motor.

Note: You will have 10–30 seconds

to complete the following steps.

4. Return to your car.

5. Press and hold the function

button you would like to use to

control the garage door. You may

need to hold the button from

5–20 seconds, during which time

the selected button LED lamp will flash slowly.

6. When the garage door moves, release the button within one second.

The LED lamp will flash rapidly until programming is complete.

7. Press and release the button again. The garage door should move,

confirming that programming is successful. If your garage door does not

operate, repeat the previous steps.

The LED lamp above the selected button will illuminate to confirm that

the system is responding to the button command.

To program another rolling code device, repeat Steps 1 through 6,

substituting a different function button in Step 5.

156

Universal Garage Door Opener (If Equipped)

2014 Expedition (exd)

Owners Guide gf, 1st Printing, June 2013

USA (fus)

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 518 519

Commentaires sur ces manuels

Pas de commentaire

Ford 2014 Expedition v.1 Manuel d'utilisateur Page 157

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2014 Expedition v.1