Ford 2013 Transit Connect v.2 Manuel d'utilisateur télécharger pdf (Page 184)

High Fluid Level

Fluid levels above the safe range

may result in transmission failure.

An overfill condition of transmission

fluid may cause shift and/or

engagement concerns and/or

possible damage.

High fluid levels can be caused by

an overheating condition.

Adjusting Automatic Transmission Fluid Levels

Before adding any fluid, make sure the correct type is used. The type

of fluid used is normally indicated on the dipstick and also in the

Capacities and Specifications chapter.

Note: Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 1/2 pint (250 ml) increments through the filler

tube until the level is correct. After adding fluid, wait 20 minutes before

checking the fluid level in order to allow the level to stabilize.

If an overfill occurs, excess fluid

should be removed by an authorized

dealer. If the fluid level is above the

MAX mark, fluid will have to be

removed.

Note: An overfill condition of

transmission fluid may cause shift

and/or engagement concerns and/or

possible damage.

Note: Do not use supplemental transmission fluid additives, treatments

or cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

Electric vehicles

For specific information on the Transit Connect Electric, refer to the

Azure Dynamics TC-E Owner’s Guide Supplement.

MIN

MAX

MIN

MAX

Maintenance 183

2013 Transit Connect (tst)

Owners Guide gf, 2nd Printing, November 2012

USA (fus)

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 320 321

Pas de commentaire

Ford 2013 Transit Connect v.2 Manuel d'utilisateur Page 184