Ford 2013 Fiesta v.1 Manuel d'utilisateur télécharger pdf (Page 221)

WAXING

• Wash the vehicle first.

• Use a quality wax that does not contain abrasives.

• Do not allow paint sealant to come in contact with any non-body

(low-gloss black) colored trim, such as grained door handles, roof

racks, bumpers, side moldings, mirror housings or the windshield cowl

area. The paint sealant will “gray” or stain the parts over time.

REPAIRING MINOR PAINT DAMAGE

Your authorized dealer has touch-up paint to match your vehicle’s color.

Take your color code (printed on a sticker in the driver’s door jamb) to

your authorized dealer to ensure you get the correct color.

• Remove particles such as bird droppings, tree sap, insect deposits, tar

spots, road salt and industrial fallout before repairing paint chips.

• Always read the instructions before using the products.

CLEANING THE ENGINE

Engines are more efficient when they are clean because grease and dirt

buildup keep the engine warmer than normal.

When washing:

• Take care when using a power washer to clean the engine. The

high-pressure fluid could penetrate the sealed parts and cause

damage.

• Do not spray a hot engine with cold water to avoid cracking the

engine block or other engine components.

• Spray Motorcraft威 Engine Shampoo and Degreaser on all parts that

require cleaning and pressure rinse clean. In Canada, use Motorcraft威

Engine Shampoo.

• Never wash or rinse the engine while it is hot or running; water in the

running engine may cause internal damage.

• Never wash or rinse any ignition coil, spark plug wire or spark plug

well, or the area in and around these locations.

• Cover the battery, power distribution box, and air filter assembly to

prevent water damage when cleaning the engine.

Vehicle Care 221

2013 Fiesta (fie)

Owners Guide gf, 1st Printing

USA (fus)

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 340 341

Pas de commentaire

Ford 2013 Fiesta v.1 Manuel d'utilisateur Page 221