Ford 2013 Expedition v.3 Manuel d'utilisateur télécharger pdf (Page 27)

100

101

5. To put the retractor in the

automatic locking mode, grasp the

shoulder portion of the belt and pull

downward until all of the belt is

pulled out.

Note: The automatic locking mode is available on the front passenger

and rear seats. This vehicle does not require the use of a locking clip.

6. Allow the belt to retract to remove slack. The belt will click as it

retracts to indicate it is in the automatic locking mode.

7. Try to pull the belt out of the retractor to make sure the retractor is

in the automatic locking mode (you should not be able to pull more belt

out). If the retractor is not locked, unbuckle the belt and repeat Steps 5

and 6.

8. Remove remaining slack from the

belt. Force the seat down with extra

weight, e.g., by pressing down or

kneeling on the child restraint while

pulling up on the shoulder belt in

order to force slack from the belt.

This is necessary to remove the remaining slack that will exist once the

extra weight of the child is added to the child restraint. It also helps to

achieve the proper snugness of the child seat to your vehicle.

Sometimes, a slight lean toward the buckle will additionally help to

remove remaining slack from the belt.

9. Attach the tether strap (if the child seat is equipped). See Using

Tether Straps in this chapter.

26 Child Safety

2013 Expedition (exd)

Owners Guide gf, 3rd Printing, April 2013

USA (fus)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 514 515

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Expedition v.3 Manuel d'utilisateur Page 27

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Expedition v.3