Ford 2013 Escape v.2 Manuel d'utilisateur télécharger pdf (Page 152)

SelectShift Automatic®

Transmission (If Equipped)

Your SelectShift automatic transmission

gives you the ability to manually change

gears if you'd like. To use SelectShift, move

the gearshift lever into S (Sport). Now you

can use the +/- buttons on the side of your

gearshift lever to select gears.

When using the toggle for manual shifting:

• Press the (+) button to upshift.

• Press the (-) button to downshift.

Note: After you have assumed manual

control with SelectShift your vehicle will

remain in this mode until you return the

gearshift lever from (S) Sport, back to (D)

Drive.

Upshift to the recommended shift speeds

according to the following chart:

Upshifts when accelerating (recom-

mended for best fuel economy)

Shift from:

15 mph (24 km/h)1 - 2

25 mph (40 km/h)2 - 3

40 mph (64 km/h)3 - 4

45 mph (72 km/h)4 - 5

50 mph (80 km/h)5 - 6

The instrument cluster will display the

selected gear that you are currently in.

SelectShift will automatically make some

shifts for you in the event that your engine

speed is running at too high, or to low an

RPM.

Note: Engine damage may occur if

excessive engine revving is held without

shifting.

Brake-Shift Interlock

WARNINGS

Do not drive your vehicle until you

verify that the brake lamps are

working.

When doing this procedure, you will

be taking the vehicle out of park

which means the vehicle can roll

freely. To avoid unwanted vehicle

movement, always fully set the parking

brake prior to doing this procedure. Use

wheel chocks if appropriate.

If the parking brake is fully released,

but the brake warning lamp remains

illuminated, the brakes may not be

working properly. See your authorized

dealer.

Use the brake shift interlock lever to move

the gearshift lever from the park position

in the event of an electrical malfunction or

if your vehicle has a dead battery.

Apply the parking brake and turn the

ignition off before performing this

procedure.

1. Insert a screwdriver (or similar tool)

between the shifter bezel and the top

finish panel.

2. Use the tool to unsnap the shifter bezel

from the finish panel.

E142627

149

Transmission

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 431 432

Commentaires sur ces manuels

Pas de commentaire