Ford 2013 Edge v.3 Manuel d'utilisateur télécharger pdf (Page 169)

100

101

Programing the transmitters

To program HomeLink® to the transmitter you must first put the

transmitter into programming mode. To do this

A. Red LED

B. Green LED

1. Press and hold one of the buttons on the hand-held transmitter for

10 seconds. The LED light will change from green to green and red.

2. Press the same button twice to confirm the change to Programming

mode. If done properly the LED light will appear red.

3. Hold the transmitter within 1–3 inches (2–8 centimeters) of the

button on the sun visor you want to program.

4. Press and hold both the programmed Genie button on the hand-held

transmitter and the button on the sun visor you want to program. The

indicator light on the sun visor will flash rapidly when the programming

is successful.

Note: the Genie transmitter will transmit for up to 30 seconds. If

HomeLink® does not program within 30 seconds the Genie transmitter

will need to be pressed again. If the Genie transmitter LED displays

green and red, release the button until the LED turns off before pressing

the button again.

Once HomeLink® has been programmed successfully, the Genie

transmitter must be changed out of program mode. To do this:

1. Press and hold the previously programmed Genie button on the

hand-held transmitter for 10 seconds. The indicator light will change

from red to red and green.

2. Press the same button twice to confirm the change. If done correctly

the LED will turn green.

168 Universal Garage Door Opener (If Equipped)

2013 Edge (edg)

Owners Guide gf, 3rd Printing

USA (fus)

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 520 521

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Edge v.3 Manuel d'utilisateur Page 169

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Edge v.3