Ford 2012 Fiesta v.2 Manuel d'utilisateur télécharger pdf (Page 269)

100

101

4. The vehicle jacking points are

located inward of the wheels.

WARNING: To lessen the risk of personal injury, do not put any

part of your body under the vehicle while changing a tire. Do not

start the engine when your vehicle is on the jack. The jack is only

meant for changing the tire.

5. Position the jack in the indentions

on the sill next to the tire you are

changing. Turn the jack handle

clockwise until the tire is off the

ground.

6. Remove the lug nuts with the lug wrench.

7. Replace the flat tire with the spare tire, making sure the valve stem is

facing outward. Reinstall the lug nuts until the wheel is snug against the

hub. Do not fully tighten the lug nuts until the wheel has been lowered.

8. Lower the wheel by turning the jack handle counterclockwise.

9. Remove the jack and fully tighten

the lug nuts in the order shown.

Refer to Wheel lug nut torque

specifications later in this chapter

for the proper lug nut torque

specification.

10. Put the flat tire, jack and lug

wrench away. Make sure the jack is

fastened so it does not rattle when

you drive. Unblock the wheels.

Roadside Emergencies

269

2012 Fiesta (fie)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 264 265 266 267 268 269 270 271 272 273 274 ... 355 356

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 Fiesta v.2 Manuel d'utilisateur Page 269

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 Fiesta v.2