Ford 2012 E-450 Manuel d'utilisateur télécharger pdf (Page 54)

5. Locate the vertical adjuster (1)

for each headlamp. Adjust the aim

by turning the adjuster control

either clockwise (to adjust up) or

counterclockwise (to adjust down).

6. In addition to the horizontal line

marked in step 2, a pair of vertical

lines (5) must be marked at the

center line of the headlamps on the

wall or screen.

7. On the wall or screen, locate the high intensity area of the beam

pattern. The left edge of the high intensity area should be even with the

vertical line corresponding to the headlamp under adjustment. If the left

edge of the high intensity area is not even with the vertical line, follow

the next step to adjust it.

8. Locate the horizontal adjuster (2) for each headlamp. Turn it

clockwise or counterclockwise, to place the left edge of the high

intensity area even with the vertical line corresponding to the headlamp

under adjustment.

VERTICAL AIM ADJUSTMENT (AERODYNAMIC HEADLAMPS)

The headlamps on your vehicle can only be vertically adjusted. Your

vehicle does not require horizontal aim adjustments.

To adjust the headlamps:

1. Park the vehicle directly in front of a wall or screen on a level surface,

approximately 25 feet (7.6 meters) away.

• (1) 8 feet (2.4 meters)

• (2) Center height of lamp to

ground

• (3) 25 feet (7.6 meters)

• (4) Horizontal reference line

2. Measure the height from the

center of your headlamp (indicated

by a 3.0 mm circle on the lens) to

the ground and mark an 8 foot

(2.4 meter) horizontal reference line

on the vertical wall or screen at this height (a piece of masking tape

works well).

Lights

2012 Econoline (eco)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 334 335

Pas de commentaire

Ford 2012 E-450 Manuel d'utilisateur Page 54