Ford 2011 Taurus v.3 Manuel d'utilisateur télécharger pdf (Page 68)

100

101

To see a clearer light pattern for adjusting, you may want to block the

light from one headlamp while adjusting the other.

For vehicles with halogen headlamps:

On the wall or screen you will

observe a flat zone of high intensity

light located at the top of the right

hand portion of the beam pattern. If

the top edge of the high intensity

light zone is not at the horizontal

reference line, the headlamp will

need to be adjusted.

For vehicles with HID headlamps:

There is a distinct cut-off (change

from light to dark) in the left

portion of the beam pattern. The

top edge of this cut-off should be

positioned two inches (50.8 mm)

below the horizontal reference line.

4. Locate the vertical adjuster on

each headlamp. Using a Phillips #2

screwdriver, turn the adjuster either

clockwise (to adjust down) or

counterclockwise (to adjust up).

5. Close the hood and turn off the

lamps.

HORIZONTAL AIM IS NOT

REQUIRED FOR THIS VEHICLE

AND IS NON-ADJUSTABLE.

TURN SIGNAL CONTROL

• Push down to activate the left

turn signal.

• Push up to activate the right turn

signal.

Lights

2011 Taurus

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 407 408

Commentaires sur ces manuels

Pas de commentaire

Ford 2011 Taurus v.3 Manuel d'utilisateur Page 68

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2011 Taurus v.3