Ford 2011 Escape Hybrid v.2 Manuel d'utilisateur télécharger pdf (Page 327)

Item Capacity

Ford Part Name or

equivalent

Ford Part Number / Ford

Specification

Windshield washer

fluid

Fill as required

Motorcraft威 Premium

Windshield Washer

Concentrate (US)

Premium Quality

Windshield Washer

Fluid (Canada)

ZC-32-A (US)

CXC-37-(A, B, D, and F)

(Canada) /

WSB-M8B16-A2/- -

Fuel tank

15 gallons

(56.8L)

——

Add the coolant type originally equipped in your vehicle. Check the coolant reservoir bottle

labeling for the correct fluid to use. Refer to Adding engine coolant in this chapter.

Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the

requirements of Ford specification WSS-M2C930-A and the API Certification mark.

Indicates only approximate dry-fill capacity.

Using any transmission fluid other than those that meet the recommended specification may cause

internal transmission damage. Do not use Motorcraft威 Continuously Variable Chain Type

Transmission Fluid (blue). This vehicle uses only Motorcraft威 MERCON威 LV ATF.

Fill to 1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole.

4WD vehicles exposed for prolonged periods to temperatures less than -40°C (-40°F) should

change out the rear axle fluid to Motorcraft威 SAE 75W-140 Rear Axle Lubricant, Ford part number

XY-75W140-QL meeting Ford specification WSL-M2C192-A.

The power transfer unit is lubricated for life with synthetic lube. Lubricant levels are not to be

checked or changed unless a leak is suspected or repair required. Replace power transfer unit

lubricant with specified synthetic lubricant anytime the unit is submerged in water.

Maintenance and Specifications

327

2011 Escape Hybrid (ehv)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 322 323 324 325 326 327 328 329 330 331 332 ... 362 363

Pas de commentaire

Ford 2011 Escape Hybrid v.2 Manuel d'utilisateur Page 327