Ford 2010 Mustang v.2 Manuel d'utilisateur télécharger pdf (Page 123)

• Grasp the shoulder portion and

pull downward until the entire

belt is pulled out.

• Allow the belt to retract. As the belt retracts, you will hear a clicking

sound. This indicates the safety belt is now in the automatic locking

mode.

How to disengage the automatic locking mode

WARNING: Ford Motor Company recommends that all safety

belt assemblies and attaching hardware should be inspected by

an authorized dealer after any collision. Safety belt assemblies not in

use during a collision should also be inspected and replaced if either

damage or improper operation is noted.

Disconnect the combination lap/shoulder belt and allow it to retract

completely to disengage the automatic locking mode and activate the

vehicle sensitive (emergency) locking mode.

WARNING: After any vehicle collision, the front passenger and

rear outboard safety belt systems must be checked by an

authorized dealer to verify that the “automatic locking retractor”

feature for child seats is still functioning properly. In addition, all safety

belts should be checked for proper function.

WARNING: BELT AND RETRACTOR ASSEMBLY MUST BE

REPLACED if the safety belt assembly “automatic locking

retractor” feature or any other safety belt function is not operating

properly when checked by an authorized dealer.

WARNING: Failure to replace the Belt and Retractor assembly

could increase the risk of injury in collisions.

Seating and Safety Restraints

123

2010 05+ Mustang (197)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 313 314

Pas de commentaire

Ford 2010 Mustang v.2 Manuel d'utilisateur Page 123