Ford 2010 Fusion v.4 Manuel d'utilisateur télécharger pdf (Page 69)

100

101

2. Remove the press pins located in

the wheel well and pull the splash

shield back.

3. Remove the bulb socket by rotating it counterclockwise, then pull it

straight out of the lamp assembly.

Replace with a new bulb, and reverse the removal steps to complete the

process.

Replacing front side marker bulbs

1. Make sure the headlamp control

is in the off position.

2. From underneath the vehicle,

partially remove the tire splash

shield by removing the press pins.

After removing to allow free access

to the front side marker lamp bulb

and electrical wire harness, the

splash shield should be able to be

repositioned.

3. Rotate the lamp clockwise while holding the electrical connector in

place. After rotating the lamp 90 degrees clockwise, pull and disengage

the wire harness and bulb from the lamp.

4. With the bulb exposed, carefully

remove the bulb from the socket by

grasping the bulb and pulling it

away from the wire harness.

Lights

2010 Fusion (fsn)

Owners Guide, 4th Printing

USA (fus)

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 339 340

Commentaires sur ces manuels

Pas de commentaire

Ford 2010 Fusion v.4 Manuel d'utilisateur Page 69

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2010 Fusion v.4