Ford 2009 Flex v.1 Manuel d'utilisateur télécharger pdf (Page 26)

The Auxiliary Input Jack provides a

way to connect your portable music

player to the in-vehicle audio

system. This allows the audio from a

portable music player to be played

through the vehicle speakers with

high fidelity. To achieve optimal

performance, please observe the

following instructions when

attaching your portable music

device to the audio system.

If your vehicle is equipped with a navigation system, refer to Auxiliary

input jack section in the Audio features chapter of your Navigation

system supplement.

Required equipment:

1. Any portable music player designed to be used with headphones

2. An audio extension cable with stereo male 1/8 in. (3.5 mm)

connectors at each end

To play your portable music player using the auxiliary input jack:

1. Begin with the vehicle parked and the radio turned off.

2. Ensure that the battery in your portable music player is new or fully

charged and that the device is turned off.

3. Attach one end of the audio extension cable to the headphone output

of your player and the other end of the audio extension cable to the AIJ

in your vehicle.

4. Turn the radio on, using either a tuned FM station or a CD loaded into

the system. Adjust the volume to a comfortable listening level.

5. Turn the portable music player on and adjust the volume to 1/2 the

volume.

6. Press AUX on the vehicle radio repeatedly until LINE in or SYNC

LINE in appears in the display.

You should hear audio from your portable music player although it may

be low.

7. Adjust the sound on your portable music player until it reaches the

level of the FM station or CD by switching back and forth between the

AUX and FM or CD controls.

2009 Flex (471)

Owners Guide (post-2002-fmt)

USA (fus)

Entertainment Systems

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 373 374

Pas de commentaire

Ford 2009 Flex v.1 Manuel d'utilisateur Page 26