Ford 2009 F-150 v.2 Manuel d'utilisateur télécharger pdf (Page 136)

procedure, the transmitters that are not present during programming will

no longer operate the vehicle.

To program the transmitters yourself:

Note: Ensure the brake pedal is not

depressed during this sequence.

• Unlock all doors using the power

door lock/unlock control. Insert a

key and turn the ignition from

the 1 (off) to the 3 (on) position

and cycle between 1 (off) and 3

(on) eight times in rapid

succession (within 10 seconds)

with the eighth turn ending in the

3 (on) position. The locks will cycle to confirm that the programming

mode has been entered.

• Within 20 seconds, program a remote transmitter by pressing any

button on a transmitter. The locks will cycle once to confirm that the

remote transmitter has been programmed. (If more than 20 seconds

pass before pressing a remote transmitter button, the programming

mode will exit and the procedure will have to be repeated.)

• Repeat the previous step to program additional remote transmitters.

The locks will cycle once to confirm that each remote transmitter has

been programmed.

• When you have completed programming the remote transmitters, turn

the ignition to the 1 (off) position or wait 20 seconds. Again the doors

will lock/unlock to confirm programming has been completed.

Illuminated entry

The interior lamps illuminate when the remote entry system is used to

unlock the door(s) or sound the personal alarm, or when the factory set

5-digit code or your personal code are correctly entered into the keyless

keypad.

The illuminated entry system will turn off the interior lights if:

• the ignition switch is turned to the on position, or

• the remote transmitter lock control is pressed, or

• after 25 seconds of illumination.

The dome lamp control (if equipped) must not be set to the off position

for the illuminated entry system to operate.

2009 F-150 (f12)

Owners Guide, 2nd Printing

USA (fus)

Locks and Security

136

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 408 409

Pas de commentaire

Ford 2009 F-150 v.2 Manuel d'utilisateur Page 136