Ford 2008 Mustang v.3 Manuel d'utilisateur télécharger pdf (Page 57)

100

101

6. Pull the bulb straight from the

socket.

Install the new bulb in reverse

order.

Replacing rear sidemarker lamp bulbs

1. Make sure the headlamp switch is

in the off position and locate the

sidemarker on the rear bumper

fascia.

2. Install a flathead screwdriver

between the rear of the sidemarker

lens and the bumper fascia.

3. Push the screwdriver to the front

of the vehicle and then slide it towards you to pop out the lens cover.

4. Carefully pull the bulb straight out of socket.

Install the new bulb in reverse order.

Replacing high-mount brake lamp bulbs

1. Make sure the headlamp switch is in the off position and then open

the trunk.

2. Inside trunk, pull the trim panel

straight off of the underside of the

trunk lid.

3. Locate the lighting assembly and

push the release tab to access the

bulb socket.

2008 05+ Mustang (197)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 284 285

Commentaires sur ces manuels

Pas de commentaire

Ford 2008 Mustang v.3 Manuel d'utilisateur Page 57

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2008 Mustang v.3