Ford 2008 Fusion Manuel d'utilisateur télécharger pdf (Page 106)

Note: On some vehicles, the perimeter lamps illuminated entry feature

will not activate in daylight conditions.

Deactivating/activating perimeter lamps illuminated entry

You may enable/disable this feature by having your vehicle serviced by

your authorized dealer.

You may also perform the following power door lock sequence to

enable/disable the perimeter lamps feature. Note: Before starting, ensure

the ignition is in the 1 (LOCK) position and all vehicle doors are closed.

You must complete Steps 1–5 within 30 seconds or the procedure will

have to be repeated. If the procedure needs to be repeated, wait a

minimum of 30 seconds before beginning again.

1. Place the key in the ignition and

turn the ignition to the 3 (RUN)

position.

2. Press the power door unlock

control on the door panel three

times.

3. Turn the ignition from the 3

(RUN) position to the 1 (LOCK)

position.

4. Press the power door unlock control on the door panel three times.

5. Turn the ignition back to the 3 (RUN) position. The horn will chirp

one time to confirm programming mode has been entered and is active.

6. Press the power door unlock control twice within 5 seconds. Note:

The horn will chirp once to indicate the perimeter lighting feature has

been deactivated. The horn will chirp once and honk once (one short

and one long) to indicate the perimeter lighting feature has been

activated.

7. Turn the ignition to the 1 (LOCK) position to exit the procedure.

Note: The horn will chirp once to confirm the procedure is complete.

Illuminated exit

• When all vehicle doors are closed and the key is removed from the

ignition, the interior dome lamps (and the exterior mirror puddle

lamps, if equipped) will illuminate.

The lights will turn off if all the doors remain closed and

• 25 seconds elapse, or

• the key is inserted in the ignition.

2008 Fusion (fsn)

Owners Guide (post-2002-fmt)

USA (fus)

Locks and Security

106

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 303 304

Pas de commentaire

Ford 2008 Fusion Manuel d'utilisateur Page 106