Ford 2008 Escape v.3 Manuel d'utilisateur télécharger pdf (Page 189)

Parking brake

Apply the parking brake whenever

the vehicle is parked. To set the

parking brake, press the parking

brake pedal down until the pedal

stops.

The BRAKE warning lamp in the

instrument cluster illuminates and

remains illuminated (when the

ignition is turned ON) until the

parking brake is released.

If the parking brake is fully released, but the brake warning lamp

remains illuminated, the brakes may not be working properly.

See your authorized dealer.

Always set the parking brake fully and make sure that the

gearshift is securely latched in P (Park) (automatic

transmission) or in 1 (First) (manual transmission).

The parking brake is not recommended to stop a moving vehicle.

However, if the normal brakes fail, the parking brake can be used to stop

your vehicle in an emergency. Since the parking brake applies only the

rear brakes, the vehicle’s stopping distance will increase greatly and the

handling of your vehicle will be adversely affected.

BRAKE

2008 Escape (204)

Owners Guide (post-2002-fmt)

USA (fus)

Driving

189

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 303 304

Pas de commentaire

Ford 2008 Escape v.3 Manuel d'utilisateur Page 189