Ford 2008 Escape Hybrid v.1 Manuel d'utilisateur télécharger pdf (Page 254)

Changing rear window wiper blade

The rear wiper arm is designed without a service position. This reduces

the risk of damage to the blade in an automatic car wash.

To replace the wiper blade:

1. Grab the wiper arm just below

the blade attachment and pull it as

far away from the glass as possible.

Do not use excessive force because

it can break the wiper arm at the

heel. Hold it there until the next

step.

2. Grab the wiper blade with your

other hand and use your fingers to

push the wiper arm tip through the

wiper blade center to separate the

blade from the arm.

3. Attach the new wiper to the

wiper arm and press it into place

until a click is heard.

If you find this procedure too

difficult, please see your dealer.

ENGINE OIL

Checking the engine oil

Refer to the scheduled maintenance information for the appropriate

intervals for checking the engine oil.

1. Make sure the vehicle is on level ground.

2. Turn the engine off and wait a few minutes for the oil to drain into the

oil pan.

3. Set the parking brake and ensure the gearshift is securely latched in P

(Park).

4. Open the hood. Protect yourself from engine heat.

2008 Escape Hybrid (ehv)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

254

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 311 312

Pas de commentaire

Ford 2008 Escape Hybrid v.1 Manuel d'utilisateur Page 254