Ford 2007 Ranger v.1 Manuel d'utilisateur télécharger pdf (Page 254)

9. If necessary, add fluid in 1/2 pint (250ml) increments through the filler

tube until the level is correct at normal operating temperatures. Refer to

the Maintenance product specifications and capacities section in this

chapter for the correct fluid type. The use of any other non-approved

fluid may cause internal transmission damage.

10. Fluid can be checked at ambient

temperatures between 50–95°F

(10–30°C). DO NOT ADD fluid until

the transmission is at normal

operating temperatures or the transmission will be overfilled.

Low fluid level

Do not drive the vehicle if the fluid

level is at or below the bottom of

the dipstick.

High fluid level

Fluid levels above the safe range

may cause overheating, shift and/or

engagement concerns and internal

transmission damage. If an overfill

condition occurs, excess fluid should

be removed by an authorized dealer.

Checking and adding manual transmission fluid (if equipped)

1. Clean the filler plug.

2. Remove the filler plug and

inspect the fluid level.

2007 Ranger (ran)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

254

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 279 280

Pas de commentaire

Ford 2007 Ranger v.1 Manuel d'utilisateur Page 254