Ford 2007 Mustang Manuel d'utilisateur télécharger pdf (Page 128)

5. Clip the tether strap to the anchor as shown.

If the tether strap is clipped

incorrectly, the child safety

seat may not be retained properly

in the event of a collision.

6. Install the child safety seat tightly

using the LATCH anchors or safety

belts. Follow the instructions in this

chapter.

7. Tighten the child safety seat tether strap according to the

manufacturer’s instructions.

If the safety seat is not anchored properly, the risk of a child

being injured in a collision greatly increases.

Attaching safety seats with LATCH

(Lower Anchors and Tethers for Children) attachments

Some child safety seats have two rigid or web mounted attachments that

connect to two anchors at certain seating positions in your vehicle. This

type of child seat eliminates the need to use safety belts to attach the

child seat. For forward-facing child seats, the upper tether strap must

also be attached to the proper tether anchor. See Attaching safety seats

with tether straps in this chapter.

Your vehicle has LATCH anchors for child seat installation at the seating

positions marked with the child seat symbol.

The center of the rear seat is

NOT designed as a seating

position and is not equipped with

safety belts. The LATCH anchors

were not designed to be used with a

child seat in the center position and

there is no tether anchor available

at the center. Attempted use of the

center as a seating position will

increase the risk of injury or death

in the event of a collision.

2007 05+ Mustang (197)

Owners Guide (post-2002-fmt)

USA (fus)

Seating and Safety Restraints

128

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 255 256

Pas de commentaire

Ford 2007 Mustang Manuel d'utilisateur Page 128