Ford 2007 Fusion v.1 Manuel d'utilisateur télécharger pdf (Page 61)

4. Remove the bulb socket by

turning it counterclockwise and

pulling it straight out.

5. Pull the bulb from the socket and

push in the new bulb.

6. Install the bulb socket into the

lamp assembly by rotating it

clockwise.

7. Carefully push the Trunk Side

Panel (dark grey, soft wheelhouse

side trim panel) back to the shingle position to the Luggage Scuff Plate

(hard molding).

8. Install trunk floor carpeting panel.

Replacing high-mount brake lamp bulb

1. Make sure the ignition control is

in the LOCK (OFF) position.

2. Open the trunk and reach

underneath package tray to locate

lamp assembly.

3. Remove the bulb socket by

rotating it counterclockwise, then

pulling it out of the lamp assembly.

4. Pull the bulb straight from the

socket and push in the new bulb.

5. Install the bulb socket into the lamp assembly by rotating it clockwise.

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is

in the OFF position.

2. Remove the two screws from the

license plate lamp assembly.

3. Remove bulb socket by turning

counterclockwise.

4. Carefully pull the bulb out from

the socket.

Install new bulb(s) in reverse order.

2007 Fusion (fsn)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 279 280

Pas de commentaire

Ford 2007 Fusion v.1 Manuel d'utilisateur Page 61