Ford 2006 Ranger v.1 Manuel d'utilisateur télécharger pdf (Page 62)

Replacement keys

If your keys are lost or stolen and you don’t have an extra coded key,

you will need to have your vehicle towed to an authorized dealer. The

key codes need to be erased from your vehicle and new coded keys will

need to be programmed.

Replacing coded keys can be very costly. Store an extra programmed key

away from the vehicle in a safe place to help prevent any

inconveniences. Please visit an authorized dealer to purchase additional

spare or replacement keys.

Programming spare keys

You can program your own coded keys to your vehicle. Please read and

understand the entire procedure before you begin.

Tips:

• A maximum of eight keys can be coded to your vehicle.

• Only use Securilock娂 keys.

• You must have two previously programmed coded keys (keys that

already operate your vehicle’s engine) and the new unprogrammed

key(s) readily accessible.

• If no previously programmed coded keys are available, you must take

your vehicle to your authorized dealer to have the spare key(s)

programmed.

1. Insert a previously programmed

coded key into the ignition.

2. Turn the ignition from the 3

(OFF) position to the 4 (ON)

position. Keep the ignition in the 4

(ON) position for at least one

second, but no more than 10

seconds.

3. Turn the ignition to the 3 (OFF)

position, and remove the coded key

from the ignition.

2006 Ranger (ran)

Owners Guide (post-2002-fmt)

USA (fus)

Locks and Security

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 255 256

Pas de commentaire

Ford 2006 Ranger v.1 Manuel d'utilisateur Page 62