Ford 2006 Escape v.3 Manuel d'utilisateur télécharger pdf (Page 273)

Checking and adding manual transmission fluid (if equipped)

1. Park the vehicle on a level

surface.

2. Engage the parking brake fully –

put in first gear.

3. Assure the vehicle cannot move.

4. Clean the filler plug.

5. Remove the filler plug and

inspect the fluid level.

6. Fluid level should be at bottom of

the opening.

7. Add enough fluid through the filler opening so that the fluid level is at

the bottom of the opening.

8. Install and tighten the fill plug securely.

Use only fluid that meets Ford specifications. Refer to the Lubricant

specifications in this chapter.

AIR FILTER

Refer to scheduled maintenance information for the appropriate

intervals for changing the air filter element.

When changing the air filter element, use only the Motorcraft air filter

element listed. Refer to Motorcraft part numbers in this chapter.

Note: Do not start your engine with the air cleaner removed and do not

remove it while the engine is running.

1. Loosen the clamp that secures the air inlet tube to the engine air filter

cover and disconnect the tube from the cover (for V6 only).

2. Release the clamps that secure the air filter housing cover.

2006 Escape (204)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

273

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 295 296

Pas de commentaire

Ford 2006 Escape v.3 Manuel d'utilisateur Page 273