Ford 2006 Crown Victoria v.2 Manuel d'utilisateur télécharger pdf (Page 178)

2. Locate the access plug on the

underside of the steering column

cover.

3. Remove the access plug using a flat head screwdriver. Insert the

screwdriver into the access hole nearest the steering wheel. Then push

and hold the override button using a flat head screwdriver. Apply the

brake pedal and shift the transmission into N (Neutral) while continuing

to depress the override button.

4. Reinstall the access plug cover, start the vehicle and release the

parking brake.

Do not drive your vehicle until you verify that the brakelamps

are working.

Always set the parking brake fully and make sure the gearshift is

latched in P (Park). Turn the ignition to the OFF/LOCK position

and remove the key whenever you leave your vehicle.

If the parking brake is fully released, but the brake warning lamp

remains illuminated, the brakes may not be working properly.

See your authorized dealer.

Brake-shift interlock – floor-shift transmission

This vehicle is equipped with a brake-shift interlock feature that prevents

the gearshift lever from being moved from P (Park) when the ignition is

in the ON position unless the brake pedal is depressed.

If you cannot move the gearshift lever out of P (Park) with ignition in

the ON position and the brake pedal depressed:

1. Apply the parking brake, turn ignition key to LOCK, then remove the

key.

2006 Crown Victoria (cro)

Owners Guide (post-2002-fmt)

USA (fus)

Driving

178

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 271 272

Pas de commentaire

Ford 2006 Crown Victoria v.2 Manuel d'utilisateur Page 178