Ford 2005 Taurus v.2 Manuel d'utilisateur télécharger pdf (Page 44)

Wagon

The tail lamp/turn lamp

bulbs/brake/backup are located in

the same portion of the tail lamp

assembly, one just below the other.

Follow the same steps to replace

either bulb:

1. Make sure headlamp switch is in

OFF position and open the liftgate

to expose the lamp assemblies.

2. Remove the two bolts from the

tail lamp assembly.

3. Carefully pull the lamp assembly

outwards from the body side panel.

When pulling you will feel a slight

resistance at the forward edge of

the lamp from a hidden snap

attachment holding the lamp to the

body side panel; pull the lamp

outwards firmly to release the attachment.

4. Twist the bulb socket counterclockwise and remove from lamp

assembly.

5. Pull the bulb straight out of the socket and push in the new bulb.

6. Install bulb socket in lamp assembly by turning clockwise.

7. Carefully install the tail lamp assembly on the body side panel and

secure it with two bolts.

REVIEW COPY

2005 Taurus (tau), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Lights

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 90 91

Pas de commentaire

Ford 2005 Taurus v.2 Manuel d'utilisateur Page 44