Ford 2005 Freestar Manuel d'utilisateur télécharger pdf (Page 106)

Tips for setting codes:

• The factory set code cannot be erased or changed.

• The factory code will work even after you have set your own personal

codes.

• Do not set a code that uses five of the same number.

• Do not use five numbers in sequential order.

Erasing personal code

1. Enter the factory set 5–digit code.

2. Within five seconds of entering the factory code, press and release the

1 • 2 control. The door locks will lock and quickly unlock to confirm

entry into the programming mode.

3. Within five seconds of Step 2, press and hold the 1 • 2 for two

seconds to erase the customer programmed code.

The programming mode is exited after five seconds of keypad inactivity.

The door locks will lock and quickly unlock to confirm programming

mode has been exited.

The personal code is now erased and only the factory set 5–digit code

will work.

Unlocking and locking the doors using keyless entry

To unlock the driver’s door, enter the factory set 5-digit code or your

personal code. Each number must be pressed within five seconds of each

other. The keyless entry keypad will illuminate after pressing the first

control on the keypad.

To unlock all doors, press the 3 • 4 control within five seconds.

To lock all doors, press the 7 • 8 and the 9 • 0 at the same time. You

do not need to enter the keypad code first. Note: The interior lamps

will turn off.

To open (or close) the power sliding doors (if equipped), press the

5 • 6 control within five seconds to open (or close) the left power

sliding door or the 9 • 0 control in order to open (or close) the right

power sliding door.

Autolock

This feature automatically locks all vehicle doors when:

• all doors are closed,

2005 Freestar (win)

Owners Guide (post-2002-fmt)

USA (fus)

Locks and Security

106

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 311 312

Pas de commentaire

Ford 2005 Freestar Manuel d'utilisateur Page 106