Ford 2005 Expedition v.2 Manuel d'utilisateur télécharger pdf (Page 137)

Compass display

The compass reading may be affected when you drive near large

buildings, bridges, power lines and powerful broadcast antenna. Magnetic

or metallic objects placed in, on or near the vehicle may also affect

compass accuracy.

Usually, when something affects the compass readings, the compass will

correct itself after a few days of operating your vehicle in normal

conditions. If the compass still appears to be inaccurate, a manual

calibration may be necessary. Refer to Compass zone/calibration

adjustment.

Most geographic areas (zones) have a magnetic north compass point that

varies slightly from the northerly direction on maps. This variation is four

degrees between adjacent zones and will become noticeable as the

vehicle crosses multiple zones. A correct zone setting will eliminate this

error. Refer to Compass zone/calibration adjustment.

Compass zone/calibration adjustment

1. Determine your magnetic zone by

referring to the zone map.

2. Turn ignition to the ON position.

3. Start the engine.

4. From Info menu, select the

Compass/Odometer function. (Do

not select Trip, DTE, or AFE. The

top of the message center must be

blank).

5. Press and hold the SETUP and

RESET controls until the message

center display changes to show the

current zone setting (XX).

6. Press the SETUP control

repeatedly until the correct zone setting for your geographic location is

displayed on the message center. The range of zone values are from 01

to 15 and “wraps” back to 01.

123

6 7 8 9 1011

2005 Expedition (exd)

Owners Guide (post-2002-fmt)

USA_English (fus)

Driver Controls

137

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 375 376

Pas de commentaire

Ford 2005 Expedition v.2 Manuel d'utilisateur Page 137