Ford 2005 Escape v.3 Manuel d'utilisateur télécharger pdf (Page 209)

This switch is located in the front

passenger’s footwell, behind a

flip-up cover, by the kick panel

access cover.

To reset the switch:

1. Turn the ignition OFF.

2. Check the fuel system for leaks.

3. If no leaks are apparent, reset the

switch by pushing in on the reset

button.

4. Turn the ignition ON.

5. Wait a few seconds and return

the key to OFF.

6. Make another check for leaks.

FUSES AND RELAYS

Fuses

If electrical components in the

vehicle are not working, a fuse may

have blown. Blown fuses are

identified by a broken wire within

the fuse. Check the appropriate

fuses before replacing any electrical

components.

Note: Always replace a fuse with one that has the specified amperage

rating. Using a fuse with a higher amperage rating can cause severe wire

damage and could start a fire.

REVIEW COPY

2005 Escape (204), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Roadside Emergencies

209

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 287 288

Pas de commentaire

Ford 2005 Escape v.3 Manuel d'utilisateur Page 209