Ford 2004 Crown Victoria v.1 Manuel d'utilisateur télécharger pdf (Page 52)

2. Hold down the MODE button for

5 seconds to enter zone mode. The

display will read PRESS RESET TO

SET ZONE XX where XX is the

current zone.

3. Release the MODE button.

4. Repeatedly press and release the

RESET button to scroll through the

zones 1–15 until the desired zone is

displayed.

5. Press the MODE button to save

the new zone setting and return to

the compass normal mode.

Note: The compass exits the zone

setting mode and returns to its

previous setting after one minute of

no activity.

Note: If power is interrupted during the zone setting process, the

compass resets to the same zone it was set to before the zone change

process was started.

Calibration mode

To calibrate the compass:

1. Press and release the MODE

button until the compass directional

heading is displayed.

2. Hold down the MODE button for

10 seconds to enter the calibration

mode. The display will read PRESS

RESET TO DECAL.

3. Release the MODE button.

123

6 7 8 9 1011

2004 Crown Victoria (cro)

Owners Guide (post-2002-fmt)

USA English (fus)

Driver Controls

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 247 248

Pas de commentaire

Ford 2004 Crown Victoria v.1 Manuel d'utilisateur Page 52