Ford 2003 Mustang v.3 Manuel d'utilisateur télécharger pdf (Page 160)

WINDSHIELD WASHER FLUID

Add fluid to fill the

reservoir if the level is

low. In very cold

weather, do not fill the

reservoir completely.

Only use a washer fluid

that meets Ford

specification

WSB-M8B16–A2. Refer to Lubricant specifications

in this chapter.

State or local regulations on volatile organic

compounds may restrict the use of methanol, a

common windshield washer antifreeze additive.

Washer fluids containing non-methanol antifreeze

agents should be used only if they provide cold

weather protection without damaging the vehicle’s

paint finish, wiper blades or washer system.

If you operate your vehicle in temperatures

below 4.5° C (40° F), use washer fluid with

antifreeze protection. Failure to use washer fluid

with antifreeze protection in cold weather could

result in impaired windshield vision and increase

the risk of injury or accident.

Note: Do not put washer fluid in the engine coolant

reservoir. Washer fluid placed in the cooling system

may harm engine and cooling system components.

ENGINE OIL

Checking the engine oil

Refer to the scheduled maintenance guide for the

appropriate intervals for checking the engine oil.

1. Make sure the vehicle is on level ground.

2. Turn the engine off and wait 5 to 10 minutes for

the oil to drain into the oil pan.

3. Set the parking brake and ensure the gearshift is

securely latched in P (Park) (automatic

transmissions) or 1 (First) (manual transmissions).

Maintenance and Specifications

160

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 215 216

Pas de commentaire

Ford 2003 Mustang v.3 Manuel d'utilisateur Page 160