Ford 2003 Focus Manuel d'utilisateur télécharger pdf (Page 194)

• Four tire rotation

Replacing the tires

Replace the tires when the wear

band is visible through the tire

treads.

When replacing full size

tires, never mix radial

bias-belted, or bias-type tires. Use

only the tire sizes that are listed

on the Certification or Tire Label.

Make sure that all tires are the

same size, speed rating, and

load-carrying capacity. Use only

the tire combinations

recommended on the label. If you

do not follow these precautions,

your vehicle may not drive

properly and safely.

Make sure that all replacement tires are of the same size, type,

load-carrying capacity and tread design (e.g., “All Terrain”,

“Touring”, etc.), as originally offered by Ford.

Failure to follow these precautions may adversely affect the

handling of the vehicle, and increase the risk of loss of vehicle

control, vehicle rollover and/or personal injury.

Tires that are larger or smaller than your vehicle’s original tires may also

affect the accuracy of your speedometer.

Maintenance and Specifications

194

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 215 216

Pas de commentaire

Ford 2003 Focus Manuel d'utilisateur Page 194